EXAMPLE FOR THE DYNAMIC TICK

This example project demonstrates functionality for starting Cesium RTOS and creating a task
to toggle and LED.


REQUIREMENTS
---------------- Setup for Dynamic Tick ----------------
- Ensure STM32CubeMX workspace chooses SysTick as the timebase source for the System.
  ** Choose "Pinout & Configuration"
  ** Select "System Core-> SYS -> Timebase Source -> SysTick"
- Ensure STM32CubeMX workspace enables TIM2 peripheral to have access to the APIs.
  ** Choose "Pinout & Configuration"
  ** Select "Timers -> TIM2 -> TIM2 Mode and Configurations -> Check "One Pulse Mode" box.
- If your ST part does not have TIM2, then you should be able to modify the generated
  "bsp_os.c" file to fit the timer that you require.


HARDWARE AND SOFTWARE
- This example will run on any ST boards with an ARMv8M architecture, such as Cortex-M23, Cortex-M33, Cortex-M55


NOTES
- If the SysTick is not selected as TimeBase source then there will be a compiling error after code generation.
